⛵️ Fast Dispatch - Getting You Back on the Water ⛵️
⛵️ Fast Dispatch - Getting You Back on the Water ⛵️
Trusted For 12 Years
Over 47,000+ Orders Shipped
90 Day Risk Free Returns
Over 4,000 5 Star Reviews
Price Match Promise
🚚 Fast Dispatch and a 5 Star Rated Service You Can Count On ✅
November 11, 2022 3 min read
The Laser 6-1 Outhaul System is now the standard that comes with all new boats. If you are finding your outhaul is very difficult to adjust it may be time to upgrade your system.
In this article, we walk you through what you'll need and how to make a Laser 6-1 Outhaul System step by step.
You can also buy the full Laser Outhaul Kit on our website.
Some ropes will need to be cut to your correct length once the system is made. This system is tied together with knots however, we would always recommend when working with Dyneema lines to splice them as this is stronger than knots.
Clew Block
The first part of the Outhaul System is going to be the clew block and hook. There are lots of different ways that people rig this. We will do it per the instructions you receive with a new boat. Take one of the 18mm blocks, the clew hook and one length of the 3mm race rope.
Tie a stopper knot in one end of the line and thread it through the centre of the block and up through the top of the block. Now grab your clew hook and thread the line through and back down into the top of the block. Lastly back through the middle of the block and tie another figure of 8.
Primary Dyneema
Take your length of 3mm Dyneema and tie a bowline around the eye on the boom end.
Now thread your line through the clew block from step one and the Dyneema back through the boom eye. The rope will then run along the boom towards the front of the boat.
Control line
Take your 4mm Race rope and an 18mm block. Thread the 4mm line about 3 inches through the centre of the block.
Now with the Primary Dyneema thread it into the top of the same 18mm and tape both lines together using the photo below as a reference.
Pull both through and tie a bowline in each.
Mid Block
Take your next 18mm block and a length of 3mm race rope and tie it into the cleat on the boom. This should face backwards down the boom towards the back of the boat.
Control line
Now thread the control line from the bowline you have tied through the mid-block tied to the boom and back through the block the bowline is tied onto going around the sheave. This will create your 6 to 1 purchase.
Mast Block
Take your last 18mm block and 3mm race top and tie a bowline around the block and the loose end will be tied around the lower mast where the boom and mast meet. This block acts as the turning point where the control line rope goes along the boom and down towards the deck plate.
The control line rope will then go through the deck block at the bottom of the mast and backwards through the cleats on the deck.
Elastic/ Shockcord
Thread the shockcord through the cleat on the top of the boom then tie a stopper knot. Now the other end can be tied to the sail or the clew hook as shown below.
If you have any questions on the Laser 6 to 1 outhaul system please get in touch with our team who are always happy to help.
Good quality fitted well, length good
Great service
Fast delivery - exactly as per order - many thanks
Nice smooth finish and easy to splice
This is not only comfortable but really roomy. The internal pocket is just right for my laptop and the straps mean that some items can be clipped on the outside. I’ll be using this for years to come!!
Great, exactly what I wanted they seem high quality and dont rust.
Such an easy website to use and the team are great. Fast arrival and brilliant condition. Definitely my go-to for all my sailing needs
Super value for money and delivered super quickly too. We were back on the water racing within no time
It’s really good you can get a spare for this because often you only lose this bit! It’s a much cheaper option and comes quickly.
The wheels were easily fitted to my laser launching trolley using existing washers and retaining clips.
Have been used only a couple of times so far but run smoothly and seem to do the
job fine.
Really pleased with the cover fits perfectly. I knew when it would arrive the company kept me up to date with the process
Good service, no complaints.
Very good tool to get those very tight knots undone
I've tried a number of different types and makes of neoprene boots for Sea Kayaking and these are the best (most comfortable) fit and easiest to get on/off to of all that I have tried, Really pleased with them. The sole is not as thick as it would appear from the photos but seem to be perfectly good for the usual limited shore walking.
Fine just as expected
Save up to 40%on your next order.